Stainless steel tap with Aqua Aurora vitaliser for water filter

The best of both worlds! The stainless steel Faucet with Aqua Aurora vitaliser for water filters, this vitalises your filtered water during draining and afterwards you use deliciously filtered and vitalised water! The perfect complement to your Berkey, ProOne or British Berkefeld water filter!

This stainless steel tap with Aqua Aurora vitaliser is high quality and beautifully finished. It completes your water filter. It fits all stainless steel Berkey water filters (not on the Berkey Light) and even on the stainless steel ProOne water filter systems and the British Berkefeld water filter systems.
 

Vitalising with stainless steel valve with Aqua Aurora vitaliser

Water, which comes out of our taps today, is heavily influenced by its unnatural environment. Water is chemically purified and then transported to consumers through elaborate piping systems. During this process, water loses its original strength and absorbs all kinds of taxing information. For instance, we know that water is burdened with radiation such as from power lines, transmission towers and generators. But we also know that when water is chemically cleansed, the loads are still present energetically. Vitalisers can erase this burdening information and replace it with the frequencies of shell lime. Thus, the water regains its original power and negative frequencies are erased. A Berkey, ProOne or British Berkefeld water filter purifies the water, but does not vitalise it. So with this combination, the process is complete!

The stainless steel tap with Aqua Aurora vitaliser thus restores the water to its natural vibration. The vitaliser works on the frequency of shell limestone. This eliminates unnatural frequencies of radiation and energetic loads of other toxic substances. People, plants and animals respond immediately and become more vital themselves. The result is fewer health problems in people and less disease and failure in plants and animals.

The operation of a Aqua Aurora Vitaliser is simple. The vitaliser consists of a stainless steel tube through which water flows. The double-walled water-carrying tube is stainless steel 316, which is certified for the food industry. The vitaliser is filled with matter in which the desired frequency (shell lime) is stored. It releases this frequency to the passing water. The vitaliser erases incriminating frequencies and replaces them with the frequency of the matter (shell lime) in the vitaliser. In the case of the Aqua Aurora vitalisers, contrary to other vitalisers, frequencies based on shell limestone (this is still very close to the original primal information of our earth, as it were the vibration of mother earth) are mainly used. This therefore makes these vitalisers unique compared to other vitalisers.
 

Features stainless steel tap with Aqua Aurora vitaliser:

• Made of high-quality stainless steel
• Beautifully polished finish
• The assembly protrudes approximately 17 cm from the water filter
• Wide nozzle opening
• Easy on/off handle position
• Fill a 250ml glass in seconds
• Includes all supplies such as a nut, cover plate, silicone sealing rings and (if needed) sealing tape. Everything needed for easy installation.
• Fully assembled and tested beforehand. All you have to do is assemble

Supplement to your Berkey, ProOne or British Berkefeld water filter

So order it easily with your stainless steel Berkey water filter, ProOne water filter or British Berkefeld water filter. The Berkey stainless steel tap is already a popular addition to a water filter, but this stainless steel tap with Aqua Aurora vitaliser now completes the process!
 

Assembly

Assembly is very easy. The tap is fully assembled and tested beforehand. It comes with a composition of a stainless steel tap with Aqua Aurora vitaliser, 1 nut tube, 1 stainless steel cover plate, 1 black rubber sealing ring and 1 white silicone sealing ring.
Insert the tap through the hole in the lower chamber of the water filter. Make sure the black rubber sealing ring (already on the thread) is on the outside. Slide the white silicone sealing ring onto the thread on the inside, followed by the other stainless steel cover plate. See image below.
Next, screw the nut tube onto the threads of the tap (on the inside of the water filter) and tighten it well (until you can't do any more). Then hold the nut tube on the inside and start turning the tap on the outside. You will notice that it will then tighten even more. So do this until you can't go any further. Then, if the tap is not straight, do the following: let go of the nut tube on the inside and only turn the tap on the outside until it is straight. This is because it then turns in its entirety. Should you have accidentally turned it too far, do NOT turn it back. You will then loosen it again. So if you have turned too far, turn again in its entirety until it is right again.
You are now ready to use and can tap water from the water filter.